Limited Time
Store Menu
 

Shipping

IMPORTANT! PLEASE READ.

Because of the many destinations and product combinations we may have, shipping charges can vary a lot from customer to customer. To keep things simple, for small thin items, we have included worldwide shipping in the price. Larger items, such as D3S, Foredit switch, Jack Arm Pad, etc. will have shipping charged at an individual flat rate for USA/Canada and Rest of World.

Items requiring shipping will indicate the need to purchase shipping next to their price and the shipping can be chosen below.

SELECT A SHIPPING OPTION
Shipping is a one-time fee per order regardless of how many items you buy.
INTERNATIONAL SHIPPING
via TNT AIR with tracking
CONTINENTAL USA & CANADA SHIPPING
via FEDEX GROUND with tracking
 
 
 

 
Restoration Items
 
 
Wheel Caps

DINO WHEEL CAP- SINGLE CAP

Exact reproduction of wheel center cap for Dino 246, Fiat Dino, and Ferrari 308 GT4.

Full product information available here:
Dino246 Blog Link- Click here
(opens in new window)

 

Price: $35 USD (select shipping option at top of page)


Wheel Cap Set

DINO WHEEL CAPS- SET OF 4

Exact reproduction of wheel center cap for Dino 246, Fiat Dino, and Ferrari 308 GT4. Includes 3M adhesion promoter.

Full product information available here:
Dino246 Blog Link- Click here
(opens in new window)

Price: $130 USD, includes worldwide shipping


Alternator Decal

FOREDIT ENGINE BAY LIGHT – VERY LIMITED SUPPLY

Exact reproduction of Foredit engine bay light as used in all Dino 206, 246 L Series, and early 246 M series cars. Light is located in engine bay and is fixed to a bracket right next to the serial number that is stamped into the chassis.  Most Dino’s are missing this light and it is far and away the most difficult to find part we encountered when restoring our Dino.  To the best of our knowledge there is no other car that uses this light and it has not been produced by the manufacturer for over 40 years.

Our reproduction is exact in every detail and is 100% indistinguishable from an original. Getting the assembly right took over 3 years and we use modern plastics to increase the durability compared to the original switch. Each switch is made up of 15 pieces and is carefully hand assembled and tested before shipping. Light bulb and mounting hardware is included.

PRODUCT DISCLAIMER:  It is important to note that the design of the original switch is poor making it very fragile. This explains why so few switches have survived. Regrettably it was impossible to improve upon the basic design without visually altering the switch so we chose to make a perfect reproduction. While we have made every effort to ensure the best reproduction possible, these switches carry over the original design faults making them fragile and are sold without any warranty expressed or implied.

LIMITED SUPPLY:  Because of the enormous amount of work it was to reproduce these parts, and the huge amount of time each switch takes to manufacture and assemble, we are limiting them to small batches until our stock of parts is exhausted. Once finished we will not be making any more. Given the extreme rarity of these parts we are urging Dino owners to buy at least a second switch to keep one on the shelf as a future spare.

SOLD OUT

 

Alternator Decal

ALTERNATOR RELAY DECAL

Exact reproduction of ALTERNATOR decal that goes on top of the Lucas relay on the fuse panel. Almost always missing or damaged, this decal is sub-surface printed and carries 3M adhesive so the colour will never wear off. Note that historical images show this decal as being installed in either direction. For proper alignment we suggest drinking at least a liter of wine before installation.

Note: Decal is shipped with a clear protective layer. Be sure to remove prior to install.

 

Price: $15 USD, includes worldwide shipping

   
 

Alternator Warning Decal

ALTERNATOR WARNING DECAL

Because most Dino’s have had their alternator re-built many times in their life this original warning decal is extremely rare to see installed. 3M adhesive and sub-surface printing ensures that this decal should last more than one re-build. Refer to image for proper mounting location.

Note: Decal is shipped with a clear protective layer. Be sure to remove prior to install.

 

Price: $15 USD, includes worldwide shipping


Alternator Combo

CHARGING SYSTEM DECAL COMBO

Both decals: Alternator Relay AND Alternator Warning decal.

Note: Decal is shipped with a clear protective layer. Be sure to remove prior to install.


Price: $25 USD, includes worldwide shipping


Marelli Regular Decal

ALTERNATOR VOLTAGE REGULATOR DECAL

Exact reproduction of decal that goes on top of the alternator voltage regulator located on the fuse panel. Almost always missing or damaged, this decal is sub-surface printed and carries 3M adhesive so the colour will never wear off.

Note: Decal is shipped with a clear protective layer. Be sure to remove prior to install.


Price: $15 USD, includes worldwide shipping


Klippan 1 Tag

KLIPPAN SEATBELT TAG- SINGLE TAG

Klippan fabric seatbelt tags exactly reproduced as original. Sewn into each seatbelt, showing compliance for road use.

Please note that the homologation date of 1969 was used in multiple years and is concours correct for Dino’s, and Ferrari Daytona’s fitted with non-retracting seatbelts.

1 KLIPPAN SEATBELT TAG ONLY.


Price: $20 USD, includes worldwide shipping


Klippan Set of 4 Tags

KLIPPAN SEATBELT TAGS- FULL SET OF 4


Good for 2 seats (each seatbelt uses 2 tags).


Price: $60 USD, includes worldwide shipping


Magnet Marelli Tag- RED

MAGNETI MARELLI S125 BX DISTRIBUTOR LABEL- RED

Aluminum ID tags for Marelli distributors. Exact reproduction to original. Available in red and silver version.
Refer to blog link for information of which label is appropriate for what car.

Dino246 Blog Link- Click here
(opens in new window)


SOLD OUT

Magneti Marelli Tag- SILVER MAGNETI MARELLI S125 BX DISTRIBUTOR LABEL- SILVER

Aluminum ID tags for Marelli distributors. Exact reproduction to original. Available in red and silver version.
Refer to blog link for information of which label is appropriate for what car.

Dino246 Blog Link- Click here
(opens in new window)


SOLD OUT
 

Magnet Marelli Tag- RED JACK ARM PAD- REPRODUCTION

Exact reproduction to original. Fits all Dino jack variations.

Note: Some pads will be shinier than others. This is release agent from the molding process and can be wiped off in order to achieve a correct, original finish.


Price: $65 USD (select shipping option at top of page)

DS3

DS3

D3S: DINO DEADLY DRIP SAVER

The Dino engine suffers from a design flaw in which the cam chain tensioner does not have a good sealing system and is prone to leak oil on the alternator. This ‘deadly drip’ short circuits the alternator requiring a costly re-build often after leaving your Dino stranded at the side of the road.

The D3S is a clever trough that directs oil from a leaky cam chain tensioner into a drip under the car to show that something is wrong. It should not be used to mask a leaky tensioner but will give you a visible sign under the car that something is wrong and a much cheaper repair than an unnecessary fried alternator and tow truck ride.

Made from laser cut and CNC bent stainless steel, the D3S installs on the car in minutes with one nut and does not require any dis-assembly to fit. For the concours crazy crowd it is invisible once installed as its view is blocked by the oil cooler but it can be removed as easy as it went on for those paranoid of the point deducting judges. Includes photographic installation instructions.

 

Price: $49 USD (select shipping option at top of page)


Magnetic License Plate Mount in Chrome

NO DRILL MAGNETIC LICENSE PLATE MOUNT- CHROME

Holes for mounting the license plate were never done at the factory. Our license plate mounting kit does not require the drilling of any holes in the body thereby preserving the factory delivered sheet metal. The kit uses powerful rubber-coated magnets that firmly hold the plate in place and protect the paint below.

Kit includes high quality polished stainless steel license plate frame, rubber-coated magnets, and all required hardware. Note: Plate frame is for North American sized license plate and is 50 state legal by not blocking registration tags.

Full product information available here:
Dino246 Blog Link- Click here
(opens in new window)


Price: $98 USD (select shipping option at top of page)


Magnetic License Plate Mount in Black NO DRILL MAGNETIC LICENSE PLATE MOUNT- BLACK

Holes for mounting the license plate were never done at the factory. Our license plate mounting kit does not require the drilling of any holes in the body thereby preserving the factory delivered sheet metal. The kit uses powerful rubber-coated magnets that firmly hold the plate in place and protect the paint below.

Kit includes high quality stainless steel black powder coated license plate frame, rubber-coated magnets, and all required hardware. Note: Plate frame is for North American sized license plate and is 50 state legal by not blocking registration tags.

Full product information available here:
Dino246 Blog Link- Click here
(opens in new window)


Price: $98 USD (select shipping option at top of page)


 
 
 

Dino Swag


Dino Decals DECAL: Approximately 4" length x 1" tall

AVAILABLE COLORS (select below): Decal Colors

$6 USD includes worldwide shipping

Select Color

Dino Decals DECAL: Approximately 4" length by 1" tall

AVAILABLE COLORS (select below): Decal Colors

$6 USD includes worldwide shipping

Select Color

Dino Decals DECAL: Approximately 4" length x 2" tall

AVAILABLE COLORS (Select below): Decal Colors

$6 USD includes worldwide shipping

Select Color

Dino Decals DECAL: Approximately 4" length by 1" tall. Red heart.

AVAILABLE COLORS (select below): Decal Colors

$6 USD includes worldwide shipping

Select Color

Dino Decal DECAL: 2 sizes available. See drop down menu.
SIZE: Select from dropdown menu
COLOR: Blue Dino script on yellow rectangle
$8.00 USD includes worldwide shipping

Size

Dino Decal DECAL: 2 sizes available. See drop down menu.
SIZE: Select from dropdown menu
COLOR: Blue Dino script on yellow circle
$8.00 USD includes worldwide shipping

Size